DIY Napkin Holders

These are SUPER easy to do.  

It may sound like it will take a long time to do, but once you get the hang of it - you should be able to make these fairly quickly.

 

Supplies -
1. Toliet Paper Rolls
2. Fabric of your choice
3. Scissors
4. Hot Glue gun and the glue

Instructions -

1. To start, cut the fabric into 10 sections that are 7 inches by 33 inches.  Then cut each section into 10 2.75 inches by 6.4 inches
2. Cut each toliet paper roll into 4 equal sections.  (This will take some saving up on the t.p. rolls) 
3. After cutting all the rolls, start assembling them. You want to cover the paper roll with hot glue.
4. Then wrap the fabric around the outside of it. 
5. Once done, add an extra strip of glue right under the overlapping edge of the fabric, sealing it as close as possible to the roll.
6. Stand roll up on its side.
7. Glue one side into the roll, folding it as flat as you can around the roll (it doesn't matter so much on this side if the edge of the fabric is flush to the roll) 
8. Turn it over and glue the other side into the roll.
9. Then carefully glue down the edges inside the roll as best as you can so no fabric inside is sticking up.
10. Repeat for as many as you need.